Hitachi CP-X2521WN, CP-X3021WN user manual Item

NETWORK menu

Item

Description

Selecting this item displays the WIRED SETUP menu for the wired LAN.

Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item.

		Use the ▲/▼ buttons to turn DHCP on/off.
		ON Ù OFF
		Select OFF when the network does not have
	DHCP	DHCP enabled. To save the setting, press the ►
		button.
	(Dynamic Host
	Configuration	• When the “DHCP” setting changes to “ON”, it
	Protocol)	takes a little time to obtain IP address from DHCP
		server.
		• Auto IP function will be assigned an IP address if
		the projector could not obtain an IP address from
		server even if DHCP is “ON”.
		Use the ▲/▼/◄/► buttons to enter the IP
		ADDRESS.
		This function can only be used when DHCP is set
WIRED SETUP		to OFF.
	IP ADDRESS	• The IP ADDRESS is the number that identies
		this projector on the network. You cannot have two
		devices with the same IP ADDRESS on the same
		network.
		• The IP ADDRESS “0.0.0.0” is prohibited.
		Use the ▲/▼/◄/► buttons to enter the same
	SUBNET	SUBNET MASK used by your computer.
		This function can only be used when DHCP is set
	MASK
		to OFF.
		• The SUBNET MASK “0.0.0.0” is prohibited.
		Use the ▲/▼/◄/► buttons to enter the DEFAULT
	DEFAULT	GATEWAY (a node on a computer network that
		serves as an access point to another network)
	GATEWAY	address.
		This function can only be used when DHCP is set
		to OFF.
		Use the ▲/▼/◄/► buttons to input the DNS
	DNS SERVER	server address.
		The DNS server is a system to control domain
		names and IP addresses on the Network.
(continued on next page)

68