Hitachi CP-X3021WN, CP-X2521WN user manual Communicaion Port

Command Control via the Network (continued)

Communicaion Port

The following two ports are assigned for the command control.

TCP #23 TCP #9715

Congure the following items form a web browser when command control is used.

Port Settings

		Click the [Enable] check box to open [Network
	Port open	Control Port1 (Port: 23)] to use TCP #23.
Network Control		Default setting is “Enable”.
		Click the [Enable] check box for the
Port1 (Port: 23)
	Authentication	[Authentication] setting when authentication
		is required.
		Default setting is “Disable”.
		Click the [Enable] check box to open [Network
	Port open	Control Port2 (Port: 9715)] to use TCP
		#9715.
Network Control		Default setting is “Enable”.
Port2 (Port: 9715)		Click the [Enable] check box for the
	Authentication	[Authentication] setting when authentication
		is required.
		Default setting is “Enable”.

When the authentication setting is enabled, the following settings are required.

Security Settings

	Authentication	Enter the desired authentication password.
	Password	ConrmThis setting will be the same for
Network Control	Re-enter	[Network Control Port1 (Port: 23)] and
	Authentication	[Network Control Port2 (Port: 9715)].
	Password	Default setting is blank.

12