Whirlpool ADG 195 A+ Error Codes, Unsatis -factory washing result Unsatis -factory drying result

Unsatis -factory washing result

Unsatis -factory drying result

The dishes were not	See notes in " Loading the Dishwasher Baskets ".
loaded correctly.
The programme was	Select a more intensive programme.
not powerful enough.	See" Wash Cycle Table ".
Not enough detergent	Use more detergent, or change your detergent.
was dispensed.
Items are blocking	Rearrange the items so that the spray can rotate freely.
the path of spray arms.
The filter combination	Clean and/or fit the filter combination correctly.
in the base of wash	Clean the spray arm jets. See "Cleaning the Spray
cabinet is not clean or	Arms".
is not correctly fitted.
This may cause
the spray arm jets
to get blocked.
Combination of soft	Use less detergent if you have soft water and select
water and too much	a shortest cycle to wash the glassware and to get
detergent.	them clean.
Aluminum utensils	Use a mild abrasive cleaner to eliminate those marks.
have rubbed against
dishes.
Dishes block	Re-loading the dishes properly.
detergent cups.
Improper loading	Load the dishwasher as suggested in the directions.
Too little rinse-aid	Increase the amount of rinse-aid/refill the rinse-aid
	dispenser.
Dishes are removed	Do not empty your dishwasher immediately after
too soon	washing. Open the door slightly so that the steam can
	escape. Begin unloading the dishwasher only once t
	he dishes are barely warm to the touch. Empty the low
	basket first. This prevents water form dropping off
	dishes in the upper basket.
Wrong program	In short program the washing temperature is lower.
has been selected	This also lowers cleaning performance. Choose
	a program with a long washing time.
Use of cutlery with	Water drainage is more difficult with these items.
a low-quality coating	Cutlery or dishes of this type are not suitable for
	washing in the dishwasher.

Error Codes

Longer inlet time.	Faucets is not opened, or water intake is restricted, or water
	pressure is too low.
Longer heating time,	Malfunction of temperature sensor or of heating element.
but not reaching required temperature
Overflow.	Some element of dishwasher leaks .
Failure of temperature sensor	Open circuit or break of temperature sensor
Failure of temperature sensor	Short circuit or break of temperature sensor

If overflow occurs, turn off the main water supply before calling a service.

WARNING! If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.

24