Hitachi CP-X2521WN, CP-X3021WN user manual Transmission method continued, Full-Duplex

6. Network Bridge Function

6.4 Transmission method (continued)

NOTE • With using the HALF-DUPLEX method, the projector can send out

254 byte data as maximum at once.

•If it is not required to monitor the response data from an external device and the RESPONSE LIMIT TIME is set to OFF, the projector can receive the data from the computer and send it out to an external device continuously.

The OFF is selected as the default setting.

6.4.2 FULL-DUPLEX

This method lets the projector make two way communication, transmitting and receiving data at the same time, without monitoring response data from an external device.

With using this method, the computer and an external device will send the data out of synchronization. If it is required to synchronize them, set the computer to make the synchronization.

NOTE • In case that the computer controls to synchronize transmitting

and receiving the data, it may not be able to control an external device well depending on the processing status of the projector.

55