Hitachi CP-X3021WN, CP-X2521WN user manual Crestron e-Control

3. Web Control

3.2 Crestron e-Control®

Tab

The Main window as shown above is displayed at rst. However, if you have enabled User Password on the Tools window

(46), a dialog prompting you to enter the password as shown on the right will be displayed, and no operation is enabled until you have entered the password. After entering

the preset password, the dialog disappears and the Main window will be displayed.

As shown below, you can open a window by			User Password dialog
clicking the corresponding tab at the top right
of the window.
Tab			Description
	Logs out from e-Control®.
Log Out	This tab appears only when User Password of the Tools window is
	enabled.	45).
Tools	Opens Tools window (
Info	Opens Info window (	47).

Contact IT Help Opens Help Desk window (48).

NOTE • If Crestron e-Control in the Network Settings (21) is set to Disable, Crestron e-Control®cannot be used to operate the projector. Enable Crestron e-Control and close the web browser. Next, restart the web browser, followed by entering the projector's IP address.

•Only English is supported on Crestron e-Control®.

•If the connection is terminated, the "Loading..." screen will appear. Check the

connection between the projector and the computer, then return or refresh the Web page.

42