Schneider Electric iEM3200, iEM3300 Set Pulse Output iEM3155 / iEM3255 / iEM3355, DOCA0005EN-04

iEM3100 / iEM3200 / iEM3300 series user manualCommunications via Modbus RS-485

Set Pulse Output (iEM3155 / iEM3255 / iEM3355)

Command		Action		Size	Type	Unit	Range		Description
Number		(R/W)
	W			1	UInt16	—	—		(Reserved)
	W			1	UInt16	—	—		(Reserved)
									Pulse Output enable / disable
	W			1	UInt16	—	0, 1		0 = Disable
									1 = Enable
							iEM3155 / iEM3355:
							1, 10, 20, 100, 200,
2003	W			2	Float32	pulse/kWh	1000		Pulse constant
							iEM3255: 0.01, 0.1,
							1, 10, 100, 500
	W			1	UInt16	—	—		(Reserved)
	W			1	UInt16	—	—		(Reserved)
	W			2	Float32	—	—		(Reserved)
	W			1	UInt16	—	—		(Reserved)
	W			1	UInt16	—	—		(Reserved)
	W			2	Float32	—	—		(Reserved)
	W			1	UInt16	—	—		(Reserved)
2038	W			1	UInt16	—	—		(Reserved)
	W			1	UInt16	ms	50, 100, 200, 300		Pulse width
			Set Tariff (iEM3155 / iEM3255 / iEM3355)
Command		Action		Size	Type	Unit	Range		Description
Number		(R/W)
	W			1	UInt16	—	—	(Reserved)
								Multi Tariff Mode
								0 = Disable Multi Tariff
2060	W			1	UInt16	—	0, 1, 2, 4	1 = Use COM as Tariff Control (maximum 4 tariffs)
								2 = Use Digital Input as Tariff Control (2 tariffs)
								4 = Use Internal Clock as Tariff Control (maximum 4
								tariffs)
	W			1	UInt16	—	—	(Reserved)
								Tariff
								1 = T1
2008								2 = T2
	W			1	UInt16	—	1–4	3 = T3
								4 = T4
								NOTE: You can only set the tariff using this method if the
								Tariff Mode is set to by Communication.
			Set Digital Input as Partial Energy Reset (iEM3155 / iEM3255 / iEM3355)
Command		Action		Size	Type	Unit	Range		Description
Number		(R/W)
	W			1	UInt16	—	—	(Reserved)
6017								Digital Input to Associate:
	W			1	UInt16	—	0, 1	0 = Disable
								1 = Enable

DOCA0005EN-04 55