Schneider Electric iEM3300, iEM3200, iEM3100 Resets, Multi Tariff feature, Related topics

Front panel display and meter setup iEM3100 / iEM3200 / iEM3300 series user manual

Related topics

•See “Troubleshooting” on page 103 for more information on the Diagnosis screen and a list of diagnostic codes.

•See “Resets” on page 36 for more information on meter resets.

Resets

The following resets are available, depending on your meter model:

Reset	Description
Partial energy	Clears all active and reactive energy accumulated since the last reset.
	NOTE: this does not reset the total active and reactive energy accumulation.
Input metering	Clears all input metering energy data.
	NOTE: you can only reset the input metering accumulation using software.

Resetting accumulated energy using the display

1.Navigate to the Partial Active E or Partial Reactive E screen. The screen displays the date of the last reset. For example:

Partial Active E

876.2

23-Apr-2012 kWh

A

Date of last reset

2.Press and hold . The Reset screen appears.

3.Press OK to confirm the reset and enter the meter password when prompted.

NOTE: Regardless of the screen you use to access this reset, accumulations of both Partial Active Energy and the Partial Reactive Energy (if available) are cleared.

Related topics

•See your software documentation for information on resetting the input metering accumulation.

Multi Tariff feature

The Multi Tariff feature is available on the following devices: iEM3115, iEM3135, iEM3155, iEM3165, iEM3175, iEM3215, iEM3235, iEM3255, iEM3265, iEM3275, iEM3335, iEM3355, iEM3365 and iEM3375.

The following table illustrates how the tariffs operate according to the tariff selection (2, 3 or 4 tariffs). These tariffs are stored in 4 different registers: T1, T2, T3 and T4.

	2 tariffs	3 tariffs	4 tariffs
	T1	T1	T1
Weekday	T2	T2	T2
	24 H	24 H	24 H
	T1		T3
Weekend	T2	T3	T4
	24 H	24 H	24 H

NOTE: If the tariff Control Mode is set to by Internal Clock, the start time of the next tariff is the end time of the current tariff. For example, T2 start equals the end of T1.

36 DOCA0005EN-04