Schneider Electric iEM3300, iEM3200, iEM3100 DOCA0005EN-04, Front panel display and meter setup

iEM3100 / iEM3200 / iEM3300 series user manual Front panel display and meter setup

Configuration menus for iEM3200 / iEM3210 / iEM3215

Wiring

CT Ratio

Frequency

Date

Time

Pulse Output

Multi Tariffs

Contrast

Password

Reset Config

Type

CT

CT Secondary

CT Primary

Frequency

Date

Time

Pulse Constant

Pulse Width

Control mode
Disable
by Internal Clock	Schedule
by Digital Input	by 2 Tariffs
by Communications	by 3 Tariffs
	by 4 Tariffs
Contrast
Password
Reset Config

AiEM3210 / iEM3215

BiEM3210

CiEM3215

Section	Parameter	Options	Description
		3PH3W
		3PH4W
	Type	1PH2W L-N	Select the power system type the meter is wired to.
Wiring		1PH2W L-L
		1PH3W L-L-N
		3CTs on I1, I2, I3	Define how many current transformers (CT) are connected to the meter and
	CT	1 CT on I1
			which terminals they are connected to.
		2 CTs on I1, I3
	CT Secondary	1	Select the size of the CT secondary, in Amps.
CT Ratio		5
	CT Primary	1 - 32767	Enter the size of the CT primary, in Amps.
Frequency	Frequency	50	Select the frequency of the electrical power system, in Hz.
		60
Date (iEM3210 / iEM3215)	Date	DD-MMM-YYYY	Set the current date using the specified format.
Time (iEM3210 / iEM3215)	Time	hh:mm	Set the time using the 24-hour format.
		0.01
		0.1
	Pulse Constant	1	Set the pulses per kWh for the pulse output.
	(imp/kWh)	10
Pulse Output (iEM3210)		100
		500
		50
	Pulse Width	100	Set the pulse width (ON time).
	(ms)	200
		300

DOCA0005EN-04 45