Schneider Electric iEM3300, iEM3200 Configuration menu for iEM3150 / iEM3350, DOCA0005EN-04

Front panel display and meter setup iEM3100 / iEM3200 / iEM3300 series user manual

Configuration menu for iEM3150 / iEM3350

Wiring	Type
Frequency	Frequency
Date	Date
Time	Time
Communication	Slave Address
	Baud Rate
	Parity
Contrast	Contrast
Reset Config	Reset Config

Section	Parameter	Options	Description
		3PH4W
		1PH2W L-N
Wiring	Type	1PH2W L-L	Select the power system type the meter is wired to.
		1PH3W L-L-N
		3PH3W
		1PH4W Multi L-N
Frequency	Frequency	50	Select the frequency of the electrical power system, in Hz.
		60
Date	Date	DD-MMM-YYYY	Set the current date using the specified format.
Time	Time	hh:mm	Set the time using the 24-hour format.
	Slave Address	1 - 247	Set the address for this device. The address must be unique for each device in
			a communications loop.
		19200	Select the speed for data transmission. The baud rate must be the same for all
	Baud Rate	38400
Communication			devices in a communications loop.
		9600
		Even	Select None if the parity bit is not used. The parity setting must be the same for
	Parity	Odd	all devices in a communications loop.
		None	NOTE: Number of stop bits = 1.
Contrast	Contrast	1-9	Increase or decrease the value to increase or decrease the display contrast.
Reset Config	Reset Config	—	Settings are reset to their defaults, except for Password. Meter restarts.

42 DOCA0005EN-04