Section 3 - Software Configuration
IPv6 Connection Type: Autoconfiguration (SLAAC/DHCPv6)
In the following section we’ll discuss the parameters that can be configured when setting up an Autoconfiguration (SLAAC/DHCPv6) connection. This is a method of connection where the ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISP’s require you to make some settings on your side before your router can connect to the IPv6 Internet.
The following parameters will be available for configuration:
Obtain IPv6 Select this option to obtain the DNS Server
DNS Servers addresses automatically.
automatically:
Use the Select this option to manually enter the DNS following IPv6 Server addresses used.
DNS Servers:
Primary DNS Enter the WAN primary DNS Server address used
Server: here.
Secondary DNS Enter the WAN secondary DNS Server address
Server: used here.
Enable
LAN IPv6 Address: Enter the LAN IPv6 address used here. This address must be in the ‘/64’ subnet.
LAN IPv6 Link-
Local Address: Displays the LAN IPv6
51 |
