D-Link DIR-645 manual L2TP Gateway IP Enter the L2TP Gateway IP address used here

Section 3 - Software Configuration

Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamic or Static IP address. L2TP usual requires a Dynamic IP configuration.

L2TP IP Address: Enter the L2TP IP address used here. This option is only available if Static IP is selected.

L2TP Subnet Enter the L2TP Subnet Mask used here.

Mask:

L2TP Gateway IP Enter the L2TP Gateway IP address used here.

Address:

L2TP Server IP Enter the L2TP Server IP address used here. This is Address: normally the same a the L2TP Gateway IP address.

Username: Enter the L2TP username used here. Password: Enter the L2TP password used here.

Verify Password: Re-enter the L2TP password used here.

Reconnect Use the radio buttons to specify the reconnect Mode: mode. The user can specify a custom schedule or specify the On Demand, or Manual option. To specify a custom schedule, use the drop-down menu to select one of the schedules that has been defined in the Schedules page. To create a new schedule, click the New Schedule button to open the Schedules page. Schedules will be discussed

later.

Maximum Idle Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, Time: enable Auto-reconnect.

Primary DNS Enter the Primary DNS IP address used here.

Server:

Secondary DNS Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Server: Internet connection, but using a second DNS address provides more stability.

D-Link DIR-645 User Manual 25