Service Mode
Start up
1Push the cursor key or to highlight 'Change Projector Address'' (menu 1).
2Press ENTER to select.
The Change Projector Address menu will be displayed.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY DIMMING
MORE ...
Select with or
then <ENTER> <EXIT> to return.
menu 1
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with or
then <ENTER> <EXIT> to return.
menu 2
Projector Address
How to change that address ?
1Push the cursor key or to highlight 'Projector Address'' (menu 1).
2Press ENTER to select.
The actual address is filled in. The first digit is highlighted.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with or
then <ENTER> <EXIT> to return.
menu 1
Entering the new projector address
-with the digit keys on the RCU or the local keypad or
-push the cursor key or to select a digit and change the value by pushing the cursor key or until the new value is reached. Continue with the other digits on the same way.
Common Address
How to change that common address ?
1Push the cursor key or to highlight the active 'Common Address'' (menu 1).
2Press ENTER to select.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with or
then <ENTER> <EXIT> to return.
menu 1
Entering the new common address
Only addresses between 0 and 1 are valid.
-with the digit keys on the RCU or the local keypad or
-pushing the cursor key or until the new value is reached.
5976069 BARCOREALITY SIM6 21032000 |
| |
|
