Random Access Adjustment Mode
Load File
Start up the Load File
1Push the cursor key or to highlight 'Load' (menu 1).
2Press ENTER to select.
The Load menu displays the corresponding files depending on the installed filter (menu 2).
This filter can be "Fit" or "All". To change the filter :
1Push the cursor key or highlight 'filter list'.
2Press ENTER to toggle the annotation between brackets.
"All" : all files that can be loaded will be displayed.
"Fit" : only the best fitting files will be displayed (with a distinction of ± 2 lines and line duration distinction of ± 300 ns, if nothing is found within this small area, the projector continues searching until it finds something.)
FILE SERVICE
LOAD
EDIT
RENAME
COPY
Select with or
then <ENTER> <EXIT> to return.
menu 1
How to load a file ?
LOAD FILE
FILTER LIST [All]
Filename Src Resolution
Video525.s01 1 | 675x240i | |
Video525.c01 | 1 | 675x240i |
Video525.c02 | 1 | 675x240i |
Active file : Video525.c50
Select with or , <ENTER> to accept <EXIT> to return.
menu 2
1Push the cursor key or to select the best fitting file.
2Press ENTER to select.
A confirm Load file menu will be displayed with the newly created file and the one on which the new file is based on.
3Press ENTER to confirm the new creation or EXIT to return to the load file menu.
During a load file, the actual active file is displayed next to the indication 'Active file'.
Note:
When scrolling through the files, the image will be adapted according to the settings of the selected file (on line adaptation).
LOAD FILE
FILTER LIST [All]
Filename Src Resolution
Video525.s01 1 | 675x240i | |
Video525.c01 | 1 | 675x240i |
Video525.c02 | 1 | 675x240i |
Active file : Video525.c50
Select with or , <ENTER> to accept <EXIT> to return.
menu 1
CONFIRM
LOAD FILE
Create file
Video525.c02 based on file Video525.s01?
<ENTER> to confirm
<EXIT> to return
menu 2
The image is not perfect ?
If the displayed image is not correct after selecting the best fitting file, go to the Edit menu, select the active file and change the File settings.
Edit File
What can be done with the Edit File menu ?
The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the data.
5976135 BARCOREALITY SIM6 21032000 |
| |
|