Installation Guidelines
Lens formulas to calculate the projector distance.
| Metric formulas (meter) | Inch formulas (inch) |
PDmin=1.371 x SW + 0.165 + 0.0083/SW | PDmin=1.371 x SW + 6.5 + 12.86/SW | |
| PDmax=2.086 x SW + 0.153 - 0.015/SW | PDmax=2.086 x SW + 6.02 - 23.25/SW |
QGD(7:1) | PD = 7.021 x SW + 0.047 + 0.0093/SW | PD = 7.021 x SW + 1.85 + 14.41/SW |
QGD(0.8:1) | PD = 0.794 x SW - 0.048 + 0.0072/SW | PD = 0.794 x SW - 1.89 + 11.16/SW |
QDG(1.27:1) | PD = 1.356 x SW - 0.065 + 0.0297/SW | PD = 1.356 x SW - 2.56 + 46.03/SW |
PDmin = 1.982 x SW + 0.476 - 0.388/SW | PDmin = 1.982 x SW + 18.74 - 601.4/SW | |
| PDmax = 2.778 x SW + 0.068 - 0.015/SW | PDmax = 2.778 x SW + 2.68 - 23.25/SW |
QFD(1.27:1) | PD = 1.33 x SW - 0.0195 + 0.0270/SW | PD = 1.33 x SW - 0.77 + 41.85/SW |
PDmin= 1.48 x SW - 0.0287 - 0.0215/SW | PDmin= 1.48 x SW - 1.30 - 33.32/SW | |
| PDmax= 2.25 x SW - 0.01 + 0.0195/SW | PDmax= 2.25 x SW - 0.39 + 30.22/SW |
PDmin= 2.18 x SW - 0.1 + 0.055/SW | PDmin= 1.48 x SW - 3.94 + 85.25/SW | |
| PDmax= 2.97 x SW + 0.1 - 0.073/SW | PDmax= 2.25 x SW + 3.94 - 113.15/SW |
QFD (2.5:1) | PD = 2.486 x SW + 0.025 + 0.0215/SW | PD = 2.486 x SW + 0.98 + 33.32/SW |
PDmin= 4.39 x SW - 0.02 - 0.029/SW | PDmin= 4.39 x SW - 0.79 - 44.95/SW | |
| PDmax= 6.00 x SW + 0.15 - 0.107/SW | PDmax= 6.00 x SW + 5.91 - 185.65/SW |
Lens program to calculate the projector distance is available on the BARCO webside :
http://www.barco.com/projecti/cusserv/index.htm
Remark :
In case of the Scheimpflug version lens, the formulas are valid in the normal position.
How to install the lens?
Installation of the lens for a standard SIM projector.
The installation of the scheimphlug lens is described in the corresponding lens kit.
1.Take the lens out of its packing material.
2. | Open the lens cover of the projector by pivoting it up and take it off. | image 1 |
3. | Loosen the fixing screws (B) of the motor part (A) and flip the motor part up. | image 2 |
4. | Open both lens locks (C) by pulling them backwards (first, lift up a little before pulling backwards). | image 2 |
5.Put the lens on the lens holder.
6. | Fix the lens by closing the both locks (C) until they are secured. | image 3 |
7.Flip the motor part back (A) (if a motorized lens is installed, be sure the teeth match the tooth profile (D) of the lens)
| and secure with the fixing screws (B). | image 3 |
8. | image 4 |
Image 1
Image 2
| 5976135 BARCOSIM 6 21032000 | |
|