Random Access Adjustment Mode
How to start up the Edit menu ?
To start up the EDIT menu:
1Push the cursor key or to highlight 'Edit'.
2Press ENTER to select.
The Edit file adaptation menu will be displayed.
3Select the file which must be edited (mostly the active file).
4Press ENTER.
The file name will be displayed in the upper right corner.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
Select with or
then <ENTER> <EXIT> to return.
menu 1
EDIT FILE
Filename Src Resolution
Video525.s01 1 | 675x240i |
Video525.c01 1 | 675x240i |
Video525.c02 1 | 675x240i |
Active file : Video525.c50 | |
Select with or , | |
<ENTER> to accept | |
<EXIT> to return. | |
menu 2 |
|
Which items can be adjusted ?
The following items can be adjusted :
Total quantity horizontal pixels
Active quantity horizontal pixels
Horizontal start in pixels
Horizontal period in µs (is automatically adapted during the installation of a file with LOAD)
Total vertical lines (is automatically adapted during the installation of a file with LOAD)
Active vertical lines
Vertical start in lines
Interlaced : toggle on/off (is automatically set to its correct position during the installation of a file with LOAD)
All settings can individually be changed.
EDIT FILE | xga.s30 | |
HORIZONTAL |
|
|
TOTAL | 1344 PIXELS | |
ACTIVE | 1024 PIXELS | |
START | 296 | PIXELS |
PERIOD | 20.678 µS | |
VERTICAL (FIELD) |
|
|
TOTAL | 806 | LINES |
ACTIVE | 768 | LINES |
START | 36 LINES | |
INTERLACED | [OFF] | |
READ AMDS |
|
|
OPTIONS |
|
|
,, , <ENTER>, <EXIT> |
How to change the settings ?
1Push the cursor key or to select an item.
The color of the selected item will change and follow one of the three methods to change the value.
a. method 1:
1press ENTER to activate the digits
2enter directly with the numeric keys on the RCU or local keypad the new value or
b. method 2:
1Press ENTER to activate the digits
2Push the cursor key or to select the changing digit.
3Push the cursor key or to scroll to desired digit.
4When finished press ENTER to confirm.
c. method 3
1 Counting up or down by pushing the cursor key or .
How to find the correct values for the displayed item?
During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are automatically measured and filled in in the menu table. These values will be available when starting up the EDIT procedure of an active file.
(Caution : Do not adjust these settings on an active file, they are used to identify the input source file.)
| 5976135 BARCOREALITY SIM6 21032000 | |
|