Rockford Fosgate 360.6 manual S P E C I F I C At I O N S

S P E C I F I C AT I O N S

Continuous Power Rating (Competition Standard) - Measured at 13.8 Battery Volts

RMS continuous power per channel,	30	Watts x 6
all channels driven into a 4Ω load
from 20 to 20,000 Hz with less than
0.05% Total Harmonic Distortion (THD)
RMS continuous power per channel,	60	Watts x 6
all channels driven into a 2Ω load
from 20 to 20,000 Hz, with less than
0.1% Total Harmonic Distortion (THD)
RMS continuous power bridged into a	120	Watts x 3
4Ω load from 20 to 20,000 Hz, with
less than 0.1% Total Harmonic Distortion (THD)
Dynamic Power Rating (IHF-202 Standard) - Measured at 14.4 Volts
Per channel into a 4Ω Load	60	Watts x 6
Per channel into a 2Ω Load	95	Watts x 6
Bridged into a 4Ω Load	190	Watts x 3

Signal-to-Noise Ratio

Frequency Response

Bandwidth

Damping Factor @ 4Ω

Slew Rate

IM Distortion (IHF)

Input Impedance

Input Sensitivity

B+ Fuse Size (External to Amplifier)

Fuse Type

Crossover Alignment

Dimensions (including end caps)

>100dB A-weighted 20Hz-20kHz ±0.5dB 10Hz-250kHz ±3dB >200 (at output connector) 30 V/μs

<0.05% 20k Ohms

Variable from 300mV to 5V Preset at the factory for 500mV

50 amp or two 25 amp

AGU

12dB/octave Butterworth (XCard C) = 80Hz (.047μf) (XCard B) = 4.5kHz (.022μf)

(XCard B) = 80Hz (.047μf) (XCard A) = 80Hz (.047μf)

95⁄8"H x 189⁄32"W x 25⁄8"D

(24.45cm x 46.43cm x 6.67cm)

– 40 –