Source Numbers 80 - 89 and 90 - 99
B SOURCE NUMBERS 81 - 86 AND 91 - 96
Projector without any 800 peripheral connected.
The source numbers 81 - 86 and 91 - 96 do not correspond to physical inputs. An additional adjustment file can be created for these source numbers. This file can contain different settings. The relationship between sources 1 - 6 and 91 - 96 or between 1 - 6 and 81 - 86 is shown in the diagram below.
source input 1
source input 2
source input 3
source input 6
source number 1 source number 81 source number 91
source number 2 source number 82 source number 92
source number 3 source number 83 source number 93
source number 6 source number 86 source number 96
file A file A' file A''
file B file B' file B''
file C file C' file C''
file F file F' file F''
Follow the steps below to create a second or a third file for sources 1 to 6 :
1.Select the source between 1 and 6.
2.Select the corresponding source number between 81 and 86 or 91 and 96 with the digit keys on the RCU.
3.Enter the adjustment mode and load a corresponding file. Edit this file if necessary.
4.Save the file and exit the adjustment mode.
Projector with a 800 peripheral connected.
Source numbers 91 - 99.
The source numbers 91 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source numbers (source numbers of the 800 peripheral). This file can contain different settings. The relationship between sources 1 - 9 of the 800 peripheral and 91 - 99 is shown in the diagram below.
source input 1 | source number 1 | file A | |
source number 91 | file A' | ||
| |||
source input 2 | source number 2 | file B | |
source number 92 | file B' | ||
| |||
source input 3 | source number 3 | file C | |
source number 93 | file C' | ||
| |||
source input 9 | source number 9 | file I | |
source number 99 | file I' | ||
|
Follow the same procedure as for a projector without a 800 peripheral connected.
5976135 BARCOREALITY SIM6 21032000 |
| |
|
