Emerson CF670WB00, CF670CK00 Trouble Shooting, Repair Parts Listing, How To Order Repair Parts

! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.

Trouble Shooting

	TROUBLE		PROBABLE CAUSE		SUGGESTED REMEDY
1.	Fan will not start.	1. Fuse or circuit breaker blown.		1.	Check main and branch circuit fuses or circuit breakers.
		2.	Loose power line connections to the fan, or loose	2.	Check line power connections to fan and switch wire
			switch wire connections in the switch housing.		connections in the switch housing.
				!	WARNING: Make sure main power is turned off.
		3.	Reversing switch in neutral position.	3.	Make sure reversing switch position is all the way to one side.
2.	Fan sounds noisy.	1. Blades not attached to fan.		1.	Attach blades to fan before operating.
		2.	Screws securing fan blade flanges to motor	2.	Check to make sure the screws which attach the fan flanges to the
			are loose.		motor are tight.
		3.	Wire connectors inside switch housing rattling.	3.	Check to make sure wire connectors in switch housing are not
					rattling against each other or against the interior wall of the switch
					housing.
				!	WARNING: Make sure main power is turned off.
		4.	Screws holding blades to flanges are loose.	4.	Tighten screws securely.
3. Fan wobbles		1. Setscrew in motor coupling is not tightened		1.	Raise coupling cover and tighten setscrew securely.
	excessively.		securely.
		2.	Setscrew in the hanger ball/downrod assembly is	2.	Tighten the setscrew in the hanger ball/downrod assembly.
			loose.
		3.	Screws securing fan blade flanges to motor are loose.	3.	Check to be sure screws which attach the fan blade flanges to the
					motor are tight.
		4.	Fan blade flanges not seated properly.	4.	Check to be sure the fan blade flanges seat firmly and uniformly to
					the surface of the motor. If flanges are seated incorrectly, loosen
					the flange screws and retighten according to the procedure in the
					section on "How to Put Your Ceiling Fan Together".
		5.	Hanger bracket and/or ceiling outlet box is not	5.	Tighten the hanger bracket screws to the outlet box, and/or secure
			securely fastened		outlet box.
		6.	Fan blades out of balance.	6.	Interchanging an adjacent (side-by-side) blade pair can redistribute
					the weight and result in smoother operation.

Repair Parts Listing

			Part Numbers
Key		Model No.	Model No.	Model No.	Model No.
No.	Description	CF670OB00	CF670WB00	CF670CK00	CF670BQ00
*	Hanger Ball Assembly,	761655-9	761655-20	761655-23	761655-19
	Consisting of:
1	Hanger Bracket	—	—	—	—
2	Hanger Ball	—	—	—	—
3	Downrod	—	—	—	—
*	Parts Bag Containing:	762449	762449	762449-1	762449
4	Wire Connector (3)	—	—	—	—
5	Threaded Stud (2)	—	—	—	—
6	Lockwasher, #8 (2)	—	—	—	—
7	Knurled Knob (2)	—	—	—
8	Clip, Hairpin	—	—	—	—
9	Pin, Clevis	—	—	—	—
10	Screw, M5 x 6mm (16)	—	—	—	—
11	Pendant, Wood, Small	—	—	—	—
12	Pendant, Wood, Large	—	—	—	—
13	Coupling, Chain (2)	—	—	—	—
14	Flange Screw with
	lockwasher, M6 x 14mm (1)	—	—	—	—
15	Cover, Ceiling	762456	762456-1	762456-2	762456-3
16	Cover, Coupling	762463	762463-1	762463-2	762463-3
17	Blade (set of 5)	762445	762445	762445-1	762445
18	Flange (set of 5)	762447	762447-1	762447-2	762447-3
19	Harness, Wiring	762450	762450	762450	762450
20	Housing, Switch	762455	762455-1	762455-2	762455-3
—	Owner's Manual	BP7271	BP7271	BP7271	BP7271

Before discarding packaging material, be certain all parts have been removed.

HOW TO ORDER REPAIR PARTS

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:

•	PART NUMBER	•	NAME OF ITEM
•	PART DESCRIPTION	•	MODEL NUMBER

The model number of your Fan will be found on a label attached to the top housing. For repair parts, phone 1-800-654-3545.

Part No. F40BP72710000 Printed in China 03/04

	2
1	3
5
4	15
6	16
7

8 9

10

17

18	19
	20

14

11

12

13

Air Comfort Products

DIVISION OF EMERSON COMPANY

8100 W. Florissant ¥ St. Louis, MO 63136

Form No. BP7271