Barco R9040100 Note for RCVDS05 users, Audio connection optional, Computer input/Monitor output²

Connections

Possible indication :

RGB [HS&VS] = RGB analog signals, separate sync is horizontal and vertical sync. RGB CS = RGB analog signals, separate sync is composite sync.

RGB CV = RGB analog signals, separate sync is composite video or tri-level sync. RGB-SOG= RGB analog signals, sync on green is composite sync. ²COMPONENT VIDEO - CS = separate sync is composite sync.

²COMPONENT VIDEO = component video with composite sync on Y or composite tri-level sync on Y.

²VIDEO ²S-VIDEO

² Optional for BARCOREALITY SIM6

Note for RCVDS05 users

When using an RCVDS 05 with a 5 cable output module, connect these 5 cables to this 5-cable input slot (slot1) of the projector. All sources of the RCVDS can now be accepted by the projector.

Audio connection (optional)

Connect the audio input to one of the 3 audio inputs.

See 'audio configuration' in this chapter for more explanation.

Computer input/Monitor output²

² Monitor output is optional for the SIM6.

Connect the output of the graphical card of the computer to the Computer input of the projector (connection < 60 cm) or insert an interface between the output of the computer and the input of the projector.

Connect the monitor of the computer to the monitor output of the projector.

This monitor output is only available when the computer input is used as input.

RC

VIDEO

3

S-V IDEO

4

SDI

SDO

5

IEEE 1394

6

TRIG

MOUSE

RS232 IN

RS232 OUT

COMM. PORT

R

G

B

H/C

V

1

COM PUTER

2

MONITOR

AUDIO IN

A

AUDIO IN

B

AUDIO IN

C

AUDIO IN

Pin configuration of the D15 connector :

1	RED	8	ground
2	GREEN	9	loop through to monitor
3	BLUE	10	ground

4loop through to monitor 11 loop through to monitor

5	ground	12	loop through to monitor
6	ground	13	horizontal/composite sync
7	ground	14	vertical sync
		15	loop through to monitor

5976135 BARCOSIM 6 21032000 4-5