QSC Audio WL2102 System Specifications subject to change without notice, Enclosure, Accessories

System Specifications (subject to change without notice)

Configuration:	Three way, bi amp or tri amp
Frequency Response1:	55 - 18,000 Hz (+/- 3 dB)
Frequency Range:	48 - 20,000 Hz (-10 dB)
Sensitivity:	LF: 98 dB (1W @ 1m)
	HF: 107.5 dB (1W @ 1m)
Nominal coverage:	Horizontal: 140 degrees	Vertical: Dependant on cumulative splay angle
Nominal Impedance:	LF: bi amp mode 8 Ohm, tri amp mode 16 Ohm.		HF: 16 Ohm
Transducers:	LF: Two 10 inch (254mm) long excursion, high power, 3 inch (76mm) voice coil, 16 Ohm, 400W each2
	HF: 3.0 inch (76mm) diaphragm, 1.4 inch (36mm) exit, 16 Ohm neodymium compression driver on
	proprietary patent-pending waveguide, 80W3
Recommended Amplifier Power:	HF: 300W
	MF: 700W tri amp mode
	LF: 700W tri amp mode
	LF/MF: 1400W bi amp mode
Enclosure:
Type:	Bass reflex (ported), trapezoidal
Material:	WL2102: cored composite laminate		WL2102-w:birch plywood
Finish:	Black or white texture coat
Grille:	Powder-coated steel
Connectors:	Two Neutrik NL8 wired in parallel
Attachment points:	Self contained rigging configuration. Front receiver tubes contain captive articulated joints (knuckle) and
	ball-lock pins on lanyards. Rear mounting block has integral mounting link and ball-lock pin on lanyard.
Weight:	WL2102: 70 lb (31.8 kg)		WL2102-w:83 lb (37.7 kg)
Accessories
Array Frames:	Stacking Frame: For suspended or stacking applications on QSC’s 215SB or 215 PCM subwoofer.
	Frame weight 33 lb (15.0 kg).
	Fly Grid: For suspended or stacking applications. Frame weight 87 lb (39.5 kg).
Software	EASE Focus line array modeling software tool available; visit www.qscaudio.com or contact QSC’s Technical
	Services for DSP files for both QSControl.net and Signal Manager
Ball-lock Pins	WL2102:
	Nylon Lanyard 5/16 inch dia. x 0.75 inch long, t-handle: p-n SR-000052-00 (Rear Link and Front Tube Pin)
	WL2102-w:
	7 inch Stainless Steel Lanyard 5/16 inch dia. x 0.75 inch long, t-handle: p-n HW-000106-00 (Rear Link Pin)
	5.5 inch Stainless Steel Lanyard 5/16 inch dia. x 0.75 inch long, t-handle: p-n HW-000126-00 (Front Tube Pin)
	Array Frames:
	Nylon Lanyard- 5/16 inch dia. x 1.25 inch long, t-handle: p-n SR-000126-00 (Array Frame Pin)
NOTES-
1- with recommended DSP settings
2- 2 hours, AES 1984-2 method, 80 - 800 Hz
3- 2 hours, AES1984-2 method, 1,000 - 10,000 Hz			11