QSC Audio WL2102 Introduction, FRONT grille removed, Rear link, mounting block, and ball-lock pin

Introduction

The WideLine loudspeaker system has been designed to pro- vide a compact system that has unique power handling, fre- quency response. Its primary uses include ballrooms, theatres, night clubs, houses of worship, and small to medium size events for the corporate and industrial markets.

WL2102 enclosures are constructed of lightweight cored-com- posite and weigh 70 lb (31.8 kg). WL2102-w enclosures are constructed of birch plywood and weigh 83 lb (37.7 kg). The hardware allows for simple vertical splay angle adjustment of 0, 2, 3, 4, 5, 6, 7, 8, 9, and 10° between enclosures.

Two array frames are available. The Stacking Frame is for sus- pended applications or stacking on top of QSC’s 215SB or 215PCM subwoofers. The large array frame is for suspended or ground stack applications.

The WideLine system is suitable for stand alone applications as a full range, articulate, high fidelity, sound reinforcement product with the ability to reproduce almost any musical pro- gram without subwoofers or bass modules. It has bass response to 55 Hz (-3 dB) in a small format package. Its 3-way, bi amp or tri amp design keeps required amplification to a min- imum.

WideLine’s exceptionally wide dispersion practically elimi- nates the need for “side” or “fill” hangs when used as the main array. Its wide dispersion also provides enhanced cover- age when used as a center cluster or as a downfill or under- hang enclosure when used with larger format line array systems.

Wide dispersion is accomplished with a 3 inch (76mm) dia- phragm, 1.4” (36mm) exit neodymium high-frequency driver mounted on a proprietary, patent-pending multiple aperture diffraction-slot waveguide. This device is the ideal linear source needed for wide angle line array performance.

Internal, mid-frequency shading can be switched to either 10” (254mm) transducer. Both transducers handle the low-frequen- cies, but only the non-shaded transducer handles the mids.

This provides smoother pattern control at the mid-high cross- over. With selectable shading, the enclosures can be used as house right or left by flipping the switch, not the enclosure.

WideLine users can also use a software tool called EASE Focus to aid in the design and implementation of a WideLine array. EASE Focus can calculate the number of enclosures required for a given space (venue), determine the optimum splay angle between those enclosures, calculate at what angle to set the array frame in a single (variable) pick-point or fixed suspension point application, and predict the acoustical response and sound pressure levels throughout the venue in a two-dimensional illustration. The software is available sepa- rately; downloadable from the QSC website or contact QSC for more information.

Like all QSC Audio products, WideLine design focuses on accurate audio performance, rapid set-up, and reduced labor requirements. Ease of transportation, assembly, use, and self- contained rigging hardware make WideLine the clear choice.

FRONT (grille removed)

1- Receiver tube (front left and right) with captive articulated joint (inside receiver tube) and ball-lock pins

2- Low frequency transducer B

3- High frequency transducer aper- ture

4- Low frequency transducer A

REAR

5- Input / output connectors (NL8)

6- Rear link, mounting block, and ball-lock pin

7- TRI AMP / BI AMP selector switch

8- MF (UNSHADED) SELECT switch

3