Section 3 - Software Configuration
IPv6 Connection Type: IPv6 in IPv4 Tunnel
In section to the user can configure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure.
The following parameters will be available for configuration: Remote IPv4 Enter the remote IPv4 address used here.
Address:
Remote IPv6 Enter the remote IPv6 address used here.
Address:
Local IPv4 Enter the local IPv4 address used here.
Address:
Local IPv6 Enter the local IPv6 address used here.
Address:
Subnet Prefix Enter the Subnet prefix length value used here.
Length:
The following parameters will be available for configuration:
Obtain IPv6 Select this option to obtain the DNS Server DNS Servers addresses automatically.
automatically:
Use the Select this option to manually enter the DNS following IPv6 Server addresses used.
DNS Servers:
Primary DNS Enter the WAN primary DNS Server address used here.
Server:
Secondary DNS Enter the WAN secondary DNS Server address used here.
Server:
56 |
