D-Link DIR-645 manual Automatically, DNS Servers, Local Address here

Section 3 - Software Configuration

Obtain IPv6 Select this option to obtain the DNS Server

DNS Server addresses automatically.

automatically:

Use the Select this option to manually enter the DNS following IPv6 Server addresses used.

DNS Servers:

Primary DNS: Enter the primary DNS Server address used here.

Secondary DNS: Enter the secondary DNS Server address used here.

Use the section to configure the internal network settings of your router. The LAN IPv6 Link-Local Address is the IPv6 Address that you use to access the Web-based management interface. If you change the LAN IPv6 Address here, you may need to adjust your PC’s network settings to access the network again. DHCP-PD can be used to acquire a IPv6 prefix for the LAN interface.

Enable DHCP- Select this option to enable DHCP PD.

PD:

LAN IPv6 Enter the LAN IPv6 address used here. This address

Address: must be in the ‘/64’ subnet.

LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used

Local Address: here.

D-Link DIR-645 User Manual 46