D-Link DIR-645 Automatic IPv6, Address Enable, Router, Advertisement, Lifetime, IPv6 Address

Section 3 - Software Configuration

The following parameters will be available for configuration:

Enable DHCP- Select this option to enable DHCP PD.

PD:

LAN IPv6 Enter the LAN IPv6 address used here. This address

Address: must be in the ‘/64’ subnet.

LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used

Local Address: here.

The following parameters will be available for configuration:

Enable	The user can tick this option to enable the auto-
Automatic IPv6	configuration feature.
address:
Enable	Tick this option to enable the automatic DHCP-PD
Automatic	on the LAN.
DHCP-PD in LAN:
	The user can select the auto-configuration type
	used here.
Router	This option is only available when the auto-
Advertisement	configuration type is set to Stateless. Enter the
Lifetime:	router advertisement lifetime value used here.
IPv6 Address	This option is only available when the auto-
Range (Start):	configuration type is set to Stateful. Enter the
	start IPv6 Address for the DHCPv6 range for your
	local computers.
IPv6 Address	This option is only available when the auto-
Range (End): configuration type is set to Stateful. Enter the end
	IPv6 Address for the DHCPv6 range for your local
	computers.
IPv6 Address	This option is only available when the auto-
Lifetime:	configuration type is set to Stateful. Enter the IPv6
	Address Lifetime (in minutes).

Click on the Save Settings button to accept the changes made.

Click on the Don’t Save Settings button to discard the changes made.

D-Link DIR-645 User Manual 57