D-Link DIR-645 manual My Internet Connection is Pptp Username/Password, Mask

Section 3 - Software Configuration

My Internet Connection is: PPTP (Username/Password)

Another Internet Connection type is PPTP. This option is typically used if you have a secure DSL Internet Connection. Most of the information needed for this connection type is provided to you by your ISP.

Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamic or Static IP address. PPTP usually requires a Dynamic IP configuration.

PPTP IP Address: Enter the PPTP IP address used here. This option is only available if Static IP is selected.

PPTP Subnet Enter the PPTP Subnet Mask used here.

Mask:

PPTP Gateway IP Enter the PPTP Gateway IP address used here.

Address:

PPTP Server IP Enter the PPTP Server IP address used here. This is Address: normally the same a the PPTP Gateway IP address.

Username: Enter the PPTP username used here. Password: Enter the PPTP password used here.

Verify Password: Re-enter the PPTP password used here.

Reconnect Use the radio buttons to specify the reconnect Mode: mode. The user can specify a custom schedule or specify the On Demand, or Manual option. To specify a custom schedule, use the drop-down menu to select one of the schedules that has been defined in the Schedules page. To create a new schedule, click the New Schedule button to open the Schedules page. Schedules will be discussed

later.

D-Link DIR-645 User Manual 23