Section 3 - Software Configuration
Guest Zone
On this page, the user will be able to configure the Guest Zone, settings. The guest zone provide a separate network zone for guest to access Internet.
The following parameters will be available for configuration:
Enable Guest Tick this option to enable the Guest Zone feature Zone: for the frequency band 2.4GHz. Use the drop- down menu to schedule the time that the Firewall rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. Click the New Schedule button
to create your own times in the Schedules page. Wireless Band: Displays the frequency band used.
Wireless The Service Set Identifier (SSID) is the name of Network Name: your wireless network. Create a name using up to
32 characters. The SSID is
Enable Routing Tick this option to enable routing between guest zones.
Between Zones:
Security Mode: The security mode enables the user to configure wireless security for this wireless guest zone. For more information about wireless security, refer to the Wireless Settings page.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
86 |
