Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable The user can tick this option to enable the auto- Automatic IPv6 configuration feature.
address:
The user can select the
IPv6 Address This option is only available when the auto- Range (Start): configuration type is set to Stateful. Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address This option is only available when the auto- Range (End): configuration type is set to Stateful. Enter the end IPv6 Address for the DHCPv6 range for your local
computers.
IPv6 Address This option is only available when the auto- Lifetime: configuration type is set to Stateful. Enter the IPv6
Address Lifetime (in minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
59 |
