Section 3 - Software Configuration
System
This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.
The following parameters will be available for configuration:
Save Settings To Use this option to save the current router Local Hard Drive: configuration settings to a file on the hard disk of the computer you are using. First, click the Save button. A file dialog will appear, allowing you to
select a location and file name for the settings.
Load Settings Use this option to load previously saved router From Local Hard configuration settings. First, use the Browse option Drive: to find a previously saved file of configuration settings. Then, click the Restore Configuration From File button below to transfer those settings
to the router.
Restore To This option will restore all configuration settings Factory Default back to the settings that were in effect at the Settings: time the router was shipped from the factory.
Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above.
Reboot The Click to reboot the router.
Device:
Clear Language If you previously installed a language pack and want to revert all the menus on the Router interface back to the default Pack: language settings, click the Clear button.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
96 |
