FARGO electronic C16 Reviewing the TOP Line LCD Error/Status Messages continued, Cause, Solution

RESTRICTED USE ONLYFargo Electronics, Inc.

Reviewing the TOP Line LCD Error/Status Messages (continued)

Message	Cause	Solution
Mag Verify Error	The mag stripe was not encoded	See the Resolving the Mag Verify
	properly.	Error Message procedure in
		Section 2, page 46.
Mag Verifying	Indicates data on mag stripe is	No action required.
	being verified.
Print Cover Open	The Top Cover is not properly	See the Resolving the Cover
	shut.	Open Error Message in Section 2,
		page 31.
Printer Ready	Indicates Printer is ready to	No action required.
	print.
Printing	Indicates Printer is printing.	No action required.
Rib Calib Failed	The attempt at calibrating the	Be sure the ribbon is removed and
	ribbon Sensor through the	that the Printer's Top Cover is
	Printer Driver has failed.	closed. Try calibrating again.
Ribbon Error/Out	The print ribbon is either out or a	See the Resolving the Ribbon
	ribbon error has occurred.	Error/Out Error Message
		procedure in Section 2, page 40.
Ribbon Jam/Out	The print ribbon has become	See the Resolving the Ribbon
	jammed in the Printer rollers, is	Breaking issues procedure in
	stuck to the surface of the card	Section 2, page 40.
	or is out.
Sensor Calibrate	Indicates the Ribbon Sensor is	No action required.
	calibrating.
Wrong Ribbon	The wrong print ribbon is	See the Resolving the Wrong
	installed.	Ribbon error (being displayed
		incorrectly) procedure in Section
		2, page 38.

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 23