
RESTRICTED USE ONLYFargo Electronics, Inc.
Selecting the Defined Area(s) function (continued)
Step Procedure
2a. Determine the area of the card necessary to define. In the sample (below), this area is indicated by the dashed outline.
b.Determine the size of this area by actually printing a card and looking at it in the same orientation as when it exits the Printer.
3Measure the total size for the area and enter those dimensions into the dimension boxes. (Note: The minimum size an area can be is .2" x .2"/5mm x 5mm.)
Karen Atkins
Access Level-2
ID# 1234478 |
| 1.2“ |
| ||
| ||
| ||
|
* 172355*
1.8“
Continued on the next page
Persona C16 Card Printer Service Manual (Rev. 5.0) | 140 |