FARGO electronic C16 service manual BOTH Line LCD Error/Status Messages, Cause, Solution

RESTRICTED USE ONLYFargo Electronics, Inc.

BOTH Line LCD Error/Status Messages

Message	Cause	Solution
CANCEL=Abort	Appears when the Resume	Press the Resume button to return
RESUME=Continue	button is pressed any time	the Printer to its Ready mode or, if
	while the Printer is powered	printing, to continue operation.
	ON.	Press the Cancel button to abort the
	Also appears when the	current print job and completely
	Cancel button is pressed	clear the Printer's memory.
	during a print job.
CANCEL=Abort	Appears when the Cancel	Press the Resume button to
RESUME=Reprint	button is pressed after an	continue printing the current print
	error has occurred.	job where it left off, once the error is
		cleared.
		Press the Cancel button to abort the
		current print job and completely
		clear the Printer's memory.
DRAM Memory	The Printer's 2 MB memory	No action required.
Bad!	module is bad or not
Service Required	installed properly.
EE Memory Error!	Indicates problem with	See the Resolving the EE Memory
RESUME=Clear	permanent circuit board	Error procedure in Section 7, page
	memory	206.
Memory
EE Memory Error!	Permanent circuit board	See the Resolving the EE Memory
RESUME=Retest	memory is bad.	Error procedure in Section 7, page
		206.
Press ON to	Appears when the Cancel	Press the Cancel (on/off) button to
initialize	(on/off) button is pressed	restart the Printer and return it to its
	before a print job is sent,	Ready mode.
	when the Printer is in its
	"Ready" mode.

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 24