FARGO electronic service manual C16 Print Driver Options Using the Settings dialog box

RESTRICTED USE ONLY Fargo Electronics, Inc.

C16 Print Driver Options

Using the Settings dialog box

Access the Settings dialog box via the Settings button on the Calibrate tab. Use the adjustment mode to change the Printer's internal settings for overall Image Darkness, Image Placement, Print Length and Magnetic Offset. (Note: The Card Printer is equipped with an internal adjustment mode programmable through the Settings dialog box. This dialog box is accessible only if the Printer is powered ON, in Ready Mode and is properly connected to the PC.)

Step Procedure

1Change these settings according to the original settings recorded on a label attached to the Printer's base plate or rear panel or refer to the remainder of this Section. (Note: These can be helpful to get back to the Printer's original baseline settings.)

Caution! These settings are optimized at the factory and in most cases, they will not need to be changed.

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 78