FARGO electronic C16 service manual Replacing the Upper Ribbon Sensor Assembly 83015111 continued

RESTRICTED USE ONLYFargo Electronics, Inc.

Replacing the Upper Ribbon Sensor Assembly (83015111) (continued)

Steps Procedure

14Use a wire cutting tool to severe the wires of the Ribbon Sensor Assembly, near the opening of the Head Harness Assembly.

15Disconnect the Ribbon Sensor cable from J12, pins 3 and 4 on the Print Circuit Board.

16Sever the wires of the Ribbon Sensor cable near the opening of the Printhead Harness Assembly.

17Take the Ribbons Sensor Board Assembly from the Printer.

18When reinstalling, route the wires for the new assembly along the same path as the Head Harness Cable.

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 179