FARGO electronic C16 service manual 197

RESTRICTED USE ONLY Fargo Electronics, Inc.

Technician Review – Removal and Replacement Procedure No. 2

Removing and replacing the Idler Springs on the C11 Card Printers with the Magnetic Encoder

Step Procedure

1

Caution: Turn OFF the Printer and unplug the power cord from the Printer.

2Turn the Printer over after unplugging the power cord.

3Remove the two (2) bottom access screws and cover, as shown below. Continued on the next page

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 197