FARGO electronic C16 service manual Access Level-2 ID#, =1.3 Y=0.3

RESTRICTED USE ONLYFargo Electronics, Inc.

Using the Defined Area Option (continued)

Step Procedure

5a. Print the card design and observe how the image is oriented on the card as it ejects from the Printer. (Note: The location of a defined area is based on the card orientation as it exits the Printer.)

b.Measure the defined area location based on the printed card. (Note: If selecting the Rotate Front 180 Degrees option, the image will appear upside down as it exits the Printer.)

c.Position the defined area opposite to the measurement of the onscreen card design (which will appear right side up).

Continued on the next page

Karen Atkins

Access Level-2

ID# 1234478

X=1.3“ Y=0.3“

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 123