FARGO electronic C16 Printer Components Dye-Sublimation Print Ribbons, Step Procedure

RESTRICTED USE ONLY Fargo Electronics, Inc.

Printer Components: Dye-Sublimation Print Ribbons

The Printer requires both specialized and authorized print ribbons in order to print and function properly.

Step	Procedure
1	Do not run the cards with a contaminated, dull or uneven surface through the
	Printer.
	Caution: Printing onto such cards will ultimately lead to poor print
	quality and will greatly reduce the life of the Printhead.
2	Always store the card stock in its original packaging or in a clean, dust-free
	container.
3	Do not print onto cards that have been dropped or soiled.
	Caution: Printhead damage (caused by contaminated or poor quality
	cards) will automatically void the Printhead's factory warranty.
4	a. Do not print over the area of the card with the punched slot if printing onto
	cards with a pre-punched slot.
	b. Avoid this area when printing by using the options in the Overlay/Print Area
	tab to omit printing in this area or punch the slot after the card has printed.
	Continued on the next page

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 16