RESTRICTED USE ONLY | Fargo Electronics, Inc. |
Using the Image Darkness option
Use this option to set the overall darkness of the printed image by increasing or decreasing the amount of heat used by the Printhead when printing.
Step | Procedure |
1Lighten the printed image by clicking the down arrow 
to enter a negative value and decrease the amount of Printhead heat.
OR
Darken the image by clicking the up arrow 
to enter a positive value and increase the amount of Printhead heat.
Maximum Adjustment Range: The maximum adjustment range is ±100.
Caution #1: For best results, make slight adjustments of only ± 4 to avoid accidentally
Caution #2: If the positive value is set too high, the print ribbon may jam or even break.
Using the Image Placement option
Use this option to adjust the lengthwise or horizontal position of the printed image on a card so it appears centered. (Note: When adjusting this value, keep in mind that cards always remain in the same landscape orientation while moving through the Printer.)
Persona C16 Card Printer Service Manual (Rev. 5.0) | 79 |
