FARGO electronic C16 Replacing the Magnetic Head Assembly High-Coercivity 810182 or Low, Steps

RESTRICTED USE ONLY Fargo Electronics, Inc.

Replacing the Magnetic Head Assembly (High-Coercivity: 810182 or Low-

Coercivity: 810182) (continued)

Steps	Procedure
15	Use the thumb and index fingers of both hands to carefully pry the Print Circuit
	Board from the Power Circuit Board.
16	Disconnect the cable connector from J18 on the Print Circuit Board.
17	Place the Printer on the input end.
18	Work the cable connector through the opening to the Access Plate area.
19	Remove the Magnetic Head Assembly from the Printer.

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 176