FARGO electronic C16 service manual Adjust the Image Placement positively

RESTRICTED USE ONLYFargo Electronics, Inc.

Resolving the Ribbon Breaking issues (continued)

Step	Procedure
4	Adjust the Image Placement positively.
	a.	Reset the Printer to clear any Error Messages by removing Power and
		reapplying.
	b.	Open the Printer Control Panel from the Computer.
		• If using Windows 95/98/ME, right click on the C11_C16 Card Printer Icon
		and select Properties.
		• If using Windows NT 4.0, right click on the C11_C16 Card Printer and
		select Document Defaults.
		• If using Windows 2000/XP, right click on the C11_C16 Card Printer and
		select Printing Preferences.
	c.	Click the Calibrate tab.
	d.	Click on the Settings button.
	e.	Adjust the Image Placement setting by +10. (See the previous page.)
	f.	Click on OK.
	g.	Print a Self-Test.
	h.	After adjusting the Image Placement, if a white edge appears on the card,
		adjust the image placement back toward its original value in increments of 2
		until the white edge is gone.

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 45