RESTRICTED USE ONLYFargo Electronics, Inc.
Selecting the Defined Area(s) function (continued)
Step Procedure
4a. Once the area is sized properly measure from the lower left corner of the card up and over to the lower left corner for the defined area to begin.
b.Enter these values into the X and Y boxes.
(Note: The card grid lines are spaced at .2 inch/5mm intervals.)
5a. Print the card design and note how the image is oriented on the card as it ejects from the Printer. (Note: The location of a defined area is based on the card orientation as it exits the Printer.)
b.Measure the defined area location based on the printed card.
•If selecting the Rotate Front 180 Degrees option, the image will appear
•In this case, position the defined area opposite to the measurement from the onscreen card design, which will appear right side up.)
Continued on the next page
Continued on the next page
Persona C16 Card Printer Service Manual (Rev. 5.0) | 141 |
