FARGO electronic C16 Resolving the Image Placement problems, Select Document Defaults

RESTRICTED USE ONLYFargo Electronics, Inc.

Resolving the Image Placement problems (continued)

Step	Procedure
2	Verify if the Image Placement setting is set correctly or incorrectly. See Graphic
	A on the next page.
	a.	Open the Printer Control Panel from the Computer.
		• If using Windows 95/98/ME, right click on the C11_C16 Card Printer Icon
		and select Properties.
		• If using Windows NT 4.0 right click on the C11_C16 Card Printer and
		select Document Defaults.
		• If using Windows 2000/XP, right click on the C11_C16 Card Printer and
		select Printing Preferences.
	b.	Click on the Calibrate tab.
	c.	Click on the Settings button.
		• If the white border is on the leading edge of the card, adjust the Image
		Placement value by –2.
		• If the white border is on the trailing edge of the card, adjust the Image
		Placement value by +2.
	d.	Click on OK.
	e.	Run a Self-Test.
	f.	If the white border is diminished, continue the adjustment until it is gone.
3	Adjust the Card Guide Bar (as needed). See Graphic B on the next page.
	a.	Open the Top Print Cover.
	b.	Loosen the two screws that hold the Card Guide Bar in place.
	c.	Carefully move the Card Guide Bar
	(Note: Ensure that all adjustments leave the Card Guide Bar equidistant from the
	rear side plate of the Printer.)

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 60