FARGO electronic C16 service manual Using the Pause for Low Ribbon option

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Pause for Low Ribbon option

Use this option as a definitive warning when running low on print ribbon. (Note: Select this option so the Printer will beep and pause and the Media LED will flash when approximately 10 to 20 prints remain on the print ribbon.)

Step Description

1Replace the ribbon and press the Pause/Resume button to continue printing with a new ribbon.

OR

Leave the existing ribbon in Printer and press the Pause/Resume button.

•Select this option, then press the Pause/Resume button and the Printer will continue printing until the end of the ribbon and will beep once before each print job. (Note: It will not be necessary to press the Pause/Resume button again to continue printing once it has been pressed initially during a batch print.)

•Do not select this option and the Printer will still beep once before each print job when approximately 10 to 20 prints remain on the print ribbon. (Note: The Printer will not pause. Instead, it will continue printing until the end of the ribbon, without user intervention.)

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 94