FARGO electronic C16 service manual Adjusting for CR-79 Adhesive Back Cards

RESTRICTED USE ONLY Fargo Electronics, Inc.

Adjusting for CR-79 Adhesive Back Cards (continued)

Step Procedure

1If you are loading CR-79cards, this guide must be adjusted to accommodate this smaller, thinner card stock.

a.Open the Printer's Top Cover.

b.Move the Adjustment Lever back, over and down into the CR-79 position to narrow the card path (so it holds these smaller cards more securely). (Note: The Internal Card Guide only moves a slight distance. This position is critical for maintaining sharp image registration.)

c.Be sure to always set this adjustment lever according to the card size already loaded in the Printer.

The CR-79 Position (used to adjust only if printing CR-79 sized cards) is displayed below.

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 76