FARGO electronic C16 service manual Cleaning the Platen Roller

RESTRICTED USE ONLY Fargo Electronics, Inc.

Cleaning the Platen Roller

Clean the Printer's Platen Roller approximately every 250 prints or during every ribbon change. (Note: This helps prevent jams and maintain the best print quality. Perform this procedure if the roller is visibly dirty.)

Step Procedure

1Leave the power ON and open the Printer's Top Cover.

2Remove the Print Ribbon.

3Locate the Platen Roller.

4Use a Cleaning Pad from the Printer Cleaning Kit to wipe the roller clean. (Note: Press the On/Cancel button and Pause/Resume button to move the roller back and forth while cleaning.)

5After the roller is clean and completely dry, replace the printing supplies and close the Printer.

Platen Roller

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 153