FARGO electronic C16 service manual Replacing the Card Feed Roller D830024

RESTRICTED USE ONLYFargo Electronics, Inc.

Replacing the Card Feed Roller (D830024) (continued)

Steps	Procedure
15	Remove the Retainer Clip (130950) from the Card Feed Roller Shaft on the rear
	of the Chassis Assembly
16	Remove the screws that hold the Card Feed Motor in place.
17	Remove the Card Feed Motor.
18	Remove the Drive Gear from the roller shaft.
19	Remove the Drive Roller Bearing (760343) from the front Side plate.
20	Slide the Card Feed Roller forward — away from the rear Side plate.

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 192