FARGO electronic C16 service manual Front of Printer

RESTRICTED USE ONLY Fargo Electronics, Inc.

The diagram (below) represents how the printed image will move in relation to the fixed card position as a positive or negative Image Placement value is entered.

Step Procedure

1Click on the left arrow to enter a positive value to move the printed image toward the leading edge of the card or the card output to the side of the Printer.

OR

Click on the right arrow to enter a negative value to move the printed image toward the trailing edge of the card or the card input to the side of the Printer.

•Printed Image Direction: The arrows on these buttons indicate the direction the printed image will move on the card.

•Maximum Adjustment Range: The maximum adjustment range is ±100. As a rule, 10 equals about .030"/. 8mm, which is about the same as the thickness of a standard CR-80 size card.

Caution: If positive value is set too high, the print ribbon may break.

Rear of Printer

Card Output

Side of Printer

(Leading Edge

of Card)

Card Input

Side of Printer

(Trailing Edge

of Card)

Direction card travels through printer

Front of Printer

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 80