FARGO electronic C16 service manual Setting the DIP Switch Settings, Diagnostic modes

RESTRICTED USE ONLY Fargo Electronics, Inc.

Setting the DIP Switch Settings

The capital letter “X” indicates that the switch should be set to ON or DOWN.

SW1	SW2	SW3	SW4	Diagnostic modes
X	X	X	X	Test5x3 is a standard YMCKO test card.
		X	X	Mag123A is a mag-only test card (records on
				the Magnetic Stripe).
	X			The RibTest calibrates the Ribbon Color
				Sensor (none or anything except Mono
				Resin).
	X	X	X	The ResinTest is a premium resin test card.
X			X	The TestCore allows reading of the core pins.
				In this mode, the Printer will beep every time
				a core pin is detected in the Ribbon Roll.

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 65