RESTRICTED USE ONLYFargo Electronics, Inc.

Using the Defined Area Option (continued)

Step Procedure

6Use the Defined Area arrows to navigate back and forth from area to area. (Note: The active area will always be highlighted with a dotted outline.)

a.Define another area by clicking on the Defined Area UP arrow.

Another .2" x .2"/5mm x 5mm area will appear in the lower left-hand corner. (Note: This is the location in which all newly defined areas will first appear.)

Up to 5 areas can be defined; however, additional areas cannot be added until the most recently created area has been moved or sized. (Note: For this reason, size and position each area as it is created.)

b.Delete an area by using the Defined Area arrows to select the area and click on the Delete button. (Note: If all areas are deleted, the K Panel Resin options will automatically be deselected.)

Persona￿ C16 Card Printer Service Manual (Rev. 5.0)

124

Page 133
Image 133
FARGO electronic C16 service manual 124