FARGO electronic C16 service manual 222

RESTRICTED USE ONLYFargo Electronics, Inc.

Glossary of Terms (continued)

Term	Definition
CR-79	A card dimension standard of 2.0625" L X 3.3125" W (+/-0.002" W,
	+/-0.005" L) or 52.400 X 84.150 mm.
CR-80	A card dimension standard of 2.125" X 3.370" (+/-0.002" W, +/-
	0.005" L) or 53.975 X 85.598 mm.
CR-90	A card dimension standard of 2.375" X 3.625" (+/-0.002" W, +/-
	0.005" L) or 60.325 X 92.075 mm.
CR-100	A card dimension standard of 2.625" X 3.875" (+/-0.002" W, +/-
	0.005" L) or 66.675 X 98.425 mm.
Cursor	The marker in the LCD Display Window that indicates the active
	selection.
Darkness	A reference to color saturation.
DB-9	A 9 pin, D-shaped connector, typically used in serial port interfaces.
DC Motor	A Motor that works on DC with continuous motion.
DC (Direct Current)	Electronic flow that is unidirectional, flowing from the positive (+) to
	negative (-) of a power source.
Default	A setting or parameter that comes preset from the factory in driver
	or firmware. Performance parameters may be customized in the
	driver, but can be reset to the factory values usually through the
	push of the default button. The default values for the firmware are
	usually denoted on a label attached to the Printer.
Defrag	Abbreviation for defragmenting. The process of reformatting data on
	a hard drive so that it uses space more efficiently.
DIP switches (Dual	A small array of mechanical switches installed on the board that can
In-line Package	be configured to change Printer operations including providing a
Switches)	variety of self-tests.
	Continued on the next page

Persona￿ C16 Card Printer Service Manual (Rev. 5.0) 222