Russound Enhance Your Audio Experience with CAV6 and Additional Amplification

SAMPLE SYSTEM CONFIGURATION 5

Additional Amplification

Additional amplification can be added to the CAV6.6 when more power or more speakers are desired.

This configuration adds an external amplifier to the CAV6.6. The Zone Audio (To Amp) Outputs are variably controlled by the associated UNO- S2 keypad and can be connected to an external amplifier. The figure shows an amplifier used in this manner. The configuration has five zones connected to an additional amplifier with one zone outputting to speakers.

Source Components

In this configuration, three of a possible six audio/video source input components are used. The source components are connected to the source Audio/Video Input Connections at the first three inputs using quality RCA cables.

Zone Audio (To Amp) & Video Outputs

In this option the Zone Audio (To Amp) Outputs for

Components List:

1 - CAV6.6 Controller

6 - UNO-S2 Keypads

1 - R1250MC Multi-zone Amplifier

3 - pair Advantage Iso-Mount Speakers

3 - pair Advantage Twist & Tilt Speakers

3 - 845.1 Micro Emitters

zones 2 through 6 have the outputs connected to the inputs of an external amplifier. The speakers for these zones are run to the output of the exter- nal amplifier for each of these zones.

An amplified subwoofer is attached to the Zone Audio Output for zone 1 while its amplified CAV6.6 output speaker connection is also still intact. This allows the user to increase the out- put of the bass response while keeping the stereo output from the CAV6.6.

Keypads

The configuration uses a single UNO-S2 Keypad per zone on the CAV6.6. Each keypad is con- nected to the UNO System Keypad Port using the CAT-5 T568A RJ-45 wiring configuration. This gives complete control of each of the 6 UNO System Controlled Zones to the correspon- ding UNO-S2 Keypad.

88